Designed for use on high temperature truck and bus applications such as diesel fuel, gasoline, hot oil, air brakes and hydraulic lines.

The Dayco style DGL hydraulic hose features a seamless chlorinated polyethylene tube and a black textile braid cover that is oil and mildew resistant, with a reinforcement of an inner textile braid and a high-tensile steel wire braid. With a temperature range of -40˚F (-40°C) to +300˚F (+149°C) and a maximum working pressure of up to 1,500 psi, this hose is recommended for use with coupling styles GL and DC. It also meets SAE specification J1402, Type A1 and is approved for DOT FMVSS- 106 air brake applications.

Designed for use with pressure washer applications.

The Dayco style DPW DayBlast^® pressure washer hose is a one-wire construction designed specifically for the demands of today’s pressure washer applications. This hose – which is recommended for use with DC couplings – features a grey non-marking synthetic rubber cover, a nitrile synthetic rubber blend tube, a temperature capability of up to +300˚F (+149°C) and working pressures up to 3,000 psi.

*NOT suitable for steam applications.

Designed for use as medium pressure hydraulic lines on mobile equipment, machine tools and farm machinery.

The Dayco style DR1 hydraulic hose features an oil-resistant, seamless synthetic rubber tube and cover with a single high-tensile steel wire braid reinforcement for increased strength and resistance to weather. With a temperature range of -40˚F (-40°C) to +212˚F (+100°C) and a maximum working pressure of up to 2,750 psi, this hose meets SAE 100R1 AT requirements and is recommended for use with coupling series DC and PG.

Designed for high pressure hydraulic lines on off-the-road construction equipment, machine tools and farm equipment.

The Dayco style DR2 hydraulic hose features an oil-resistant synthetic rubber tube, a black synthetic rubber cover that is resistant to both oil and weather and a reinforcement of two high-tensile steel wire braids. With a temperature range of -40°F (-40°C) to +212°F (+100 °C) and a maximum working pressure of up to 5,000 psi, this hose is recommended for use with coupling styles PG and DC and meets SAE 100R2AT.

Designed for use as a suction or return line on hydraulic systems.

The Dayco style DR4 hydraulic hose features a nitrile tube and MSHA approved synthetic rubber cover that is both oil and weather resistant, with a single textile braid and helix wire reinforcement for exceptional flexibility. It has a vacuum rating of 25" Hg, a temperature range of -40°F (-40°C) to +250°F (+121°C) and a maximum working pressure of up to 300 psi. Meeting SAE 100R4, this hose is recommended for use with coupling styles DC (12, 16 & 20 size only) and PG.

Designed for use as a low pressure hydraulic line, flexible fuel line, power steering return line, and lubrication line.

The Dayco style DR6 hydraulic hose features a nitrile tube and neoprene MSHA approved cover with a single textile braid reinforcement. It has a temperature range of -40°F (-40°C) to +212°F (+100°C) and a maximum working pressure of up to 400 psi. This hose, which meets SAE 100R6, is recommended for use with coupling style DC.

Designed for use in medium pressure hydraulic systems which require a thermoplastic tube.

The Dayco style DR7 hose features a thermoplastic tube and black polyurethane, pin-pricked cover that is abrasion resistant, with a single polyester fiber braid reinforcement. It has a temperature range of -40˚F (-40°C) to +200˚F (+94°C) and a maximum working pressure of up to 2,750 psi. Meeting SAE 100R7, this hose is recommended for use with coupling series DC and TC.

Designed for use in medium pressure hydraulic systems which require a non-conductive hose and a thermoplastic tube.

The Dayco style DR7E hydraulic hose features a thermoplastic tube and orange polyurethane, non-pin-pricked cover that resists abrasion, with a single polyester fiber braid reinforcement. It has a temperature range of -40˚F (-40°C) to +200˚F (+94°C) and maximum working pressure of up to 2,750 psi. This hose is recommended for use with coupling series DC and 5 size TC and meets SAE 100R7 Non-Conductive requirements.

Designed for high pressure hydraulic service.

The Dayco style DR12X hydraulic hose features an oil-resistant synthetic rubber tube and a synthetic rubber cover that is resistant to both oil and weather. Utilizing a MSHA listed cover with a reinforcement of four spiral layers of high-tensile steel wire, this hose features a temperature range of -40°F (-40°C) to +250°F (+121°C) and a maximum working pressure of 4,000 psi. Compared to braided hose, the Dayco style DR12X hose provides longer life under the higher temperatures and pressures of modern hydraulically operated equipment. It is recommended for use with coupling style PG and meets SAE 100R12.

Designed for use with corrosive and/or high temperature fluids.

The Dayco style DR14 hydraulic hose features a white PTFE tube with a cover that consists of one braid of high-tensile stainless steel wire. It has a temperature range of -65˚F (-54°C) to +450˚F (233°C) and maximum working pressure of up to 1,500 psi. For steam, the maximum operating pressure is 200 psi at +388˚F (+198˚C). This hose is recommended for use with coupling style 91N and meets SAE 100R14A.

*May be used from the air compressor to the air reservoir on truck air brake applications.
*NOT recommended for fuel applications

Designed for severe high pressure applications.

The Dayco style DR15X hydraulic hose features an oil and weather-resistant synthetic rubber MSHA-approved cover with four- or six-spiraled layers of high-tensile steel wire to provide reinforcement. It offers a temperature range of -40°F (-40°C) to +250°F (+121°C) and a maximum working pressure of 6,000 psi.

Designed as a replacement for SAE 100R2 high pressure hydraulic lines on off-the-road construction equipment, machine tools and mining equipment.

The Dayco style DR16 hydraulic hose features an oil-resistant synthetic rubber tube and synthetic rubber cover that is resistant to both oil and weather and a reinforcement of two high-tensile steel wire braids. Compared to standard SAE 100R2 hoses, Dayco’s DR16 hose has a 50% smaller bend radius for tighter installations and easier routing. The temperature range is -40°F (-40°C) to +212°F (+121°C) and it has a maximum working pressure of up to 5,000 psi. Recommended for use with coupling styles PG and DC, this hose meets SAE 100R16.

Designed for timber processing and handling, agricultural and construction industries requiring an extra tough rubber cover for abrasion resistant applications.

The Dayco style DR17 hydraulic hose features a synthetic rubber tube and abrasion resistant cover. Hose I.D.s of 1/4", 3/8" and 1/2" have one braid of high-tensile strength steel reinforcement. Hose IDs of 5/8", 3/4" and 1" consist of two high-tensile strength steel reinforcement braids. The temperature range is -40°F (-40°C) to +212°F (+121°C) and it has a maximum working pressure of up to 3,000 psi. Meeting SAE 100R17, it is recommended for use with coupling series DC (sizes 4, 6, 8, and 10) and PG (size 12 and 16).

Designed for use with power steering fluid applications.

The Dayco style DPS high temperature power steering pressure hose utilizes a chlorinated polyethylene tube. The hose’s synthetic rubber cover resists oil, ozone and heat and protects a synthetic rubber tube that is compatible with power steering fluid. Two textile braids that resist high temperatures and permit proper volumetric expansion for system noise damping also provide an additional layer of reinforcement. Built to meet and exceed SAE J2050 specifications, its temperature range is -40°F (-40°C) to +300°F (+121°C) and it has a maximum working pressure of 1,500 psi.

Used for extreme high-pressure hydraulic lines on off-the-road construction equipment, machine tools and farm equipment.

The Dayco style DKF13-SAE100R13 hydraulic hose features four spiral layers of high-tensile steel wire for hose sizes 12 – 20, and six spiral layers of high-tensile steel wire for size 24. The tube is designed from oil-resistant synthetic rubber with a cover designed to resist weather. Recommended for use with the LG coupling style, this hose’s temperature range is -40°F (-40°C)  to +248°F (+120°C) and it has a maximum working pressure of 5,075 psi.

Used for extreme high-pressure hydraulic lines on off-the-road construction equipment, machine tools and farm equipment.

The Dayco style DKF15-SAE 100R15 hydraulic hose features four spiral layers of high-tensile steel wire for hose sizes 12 – 20 and six spiral layers of high-tensile steel wire for size 24. The tube is designed from oil-resistant synthetic rubber with a cover designed to resist weather. Recommended for use with the LG coupling style, this hose has a temperature range of -40°F (-40°C) to +248°F (+120°C) and a maximum working pressure of 6,090 psi.

Used for high pressure hydraulic lines on off-the-road construction equipment, machine tools and farm equipment.

The Dayco style DKF2-SAE 100R2 hydraulic hose features two braids of high-tensile steel wire. The tube is designed from oil-resistant synthetic rubber with a cover engineered to resist weather. Recommended for use with the KG coupling style, this hose has a temperature range of -40°F (-40°C) to +248°F (120°C) and a maximum working pressure of up to 5,800 psi.

Used for extreme high-pressure hydraulic lines on off-the-road construction equipment, machine tools and farm equipment.

The Dayco style DKF2-SAE 100R2 hydraulic hose features four spiral layers of high-tensile steel wire for hose sizes 6 – 16. The tube is designed from oil resistant synthetic rubber with a cover designed to resist weather. Recommended for use with the JG coupling style, this hose’s temperature range is -40°F (-40°C) to +248°F (+120°C) and it has a maximum working pressure of up to 6,450 psi.

Designed for low pressure transmission of oil, air, water and coolants.

The Dayco style DTC push-on hose features a nitrile tube and impregnated textile braid cover that is oil and mildew resistant. Its temperature range is from -40˚F (-40°C) to +200˚F (+93.3°C) and it has a maximum working pressure of 250 psi, or 160°F (+71°C) on compressed air applications and is recommended for use with coupling styles PO and BI.

*NOT recommended for use on impulse applications.

Designed for use with all styles of permanent crimp couplings.

Constructed of steel and/or brass, Dayco’s coupling adapters allow for the convenient adaption of couplings meant for applications beyond normal coupling stock.

Designed for use with style DBH hose.

Constructed of aluminum and/or steel, the Dayco beadlock AC couplings are commonly used for low- to high-pressure refrigerant applications for automotive and heavy duty vehicles. Available in coupling styles BL and SB.

Designed for use with the DKF2, DKF13, DKF15, DR6, DR17, DB7, DR2, DR12X, DR15X, DL6/DFL, DR16, DGL, DR1, DR7, DR7E, DR14, DR4 and DR5 hoses.

Dayco’s permanent crimp couplings are one-piece steel, aluminum, or brass material. Typically, permanent crimp couplings are used in a wide variety of applications, ranging from low-pressure refrigerant applications to high pressure hydraulic lines on off-the-road construction equipment, machine tools, farm equipment and marine equipment. Available in coupling styles 91N, DC, TC, JG, KG, LG, PG, TG and XG.

Designed for use with styles DGL and DR5 hose and constructed of steel.

Dayco’s reusable couplings – which are available in DN and GL coupling styles – are commonly used for medium pressure applications found on truck and bus applications, material handling equipment, off-the-road equipment, and machine tools.

Designed for use with styles DB7, D6FL and DTC hose.

Dayco specialty couplings cover push-to-connect couplings and barbed inserts. Made of steel and/or brass and available in coupling styles PO and BI, these couplings are suited for applications such as the low pressure transmission of oil, air, water and other fluids. In some cases, they are also used on medium-pressure applications for high-temperature fluids.

Designed to deliver 35 tons of crimping force.

This crimper includes a 1 HP pump to avoid using hand or foot pumps and four strain rods for reinforcement and added precision and durability. Color coded die sets make correct die selection easy. The D105DC delivers 35 tons of force through eleven sets of optional dies for crimping one- and two-wire braided hose and four-wire spiral hose through 1" I.D.

Providing 60 tons of crimping force.

This crimper quickly and easily works on materials most small crimpers are unable to handle. Designed to deliver 60 tons of crimping force, the Dayco D165 crimper delivers the power to quickly and easily crimp tough fittings that most small crimpers are unable to handle. A fully adjustable micrometer style crimp adjustment accommodates a wide range of hoses and fittings without the need for special shims or spacers. The easily removable coupling stop and cylinder retraction stop allows repetitive crimps to be made quickly and easily. This workhorse crimper will handle two-wire braided hose and four-wire spiral hose through 1-1/4" I.D.

Designed for crimping a range of hydraulic applications with up to 80 tons of crimping force.

Specially designed for crimping a wide range of hose and coupling styles, this is the most versatile crimper Dayco offers. It comes with seven different sets of crimp dies that allow the capability of crimping one-wire and two-wire braid and four-wire and six-wire spiral hose through and including the 1-1/4" I.D. sizes. Optional dies can provide increased coverage to include 1-1/2" and 2" I.D. four- and six-wire spiral hose. Color coding dies save time and help prevent mistakes and the addition of a standard crimp coupling stop makes it easier to set crimp lengths for normal crimping. This sturdy machine has four strain rods to increase crimping precision, a micrometer gauge with limit switch for greater crimping accuracy, a simplified controller design featuring a built-in circuit breaker and an emergency stop switch.

Designed to deliver 340 tons of crimping force.

The ideal crimper for repeated crimps of large quantities, the Dayco CC4-50 crimper allows for color coding dies to save time and help prevent mistakes. It features the addition of a standard crimp coupling stop that makes it easier to set crimp lengths for normal crimping. Plus it offers the increased capacity to crimp up to 2" on one- and two-wire braided hose and four- and six-wire spiral hose. The CC4-50 delivers 340 tons of force through 10 optional die sets. The Act-1 digital crimp control center eliminates the need for crimp specs and can store your settings for easy call up on future crimps.

Designed to deliver 35 tons of crimping force.

Top and bottom plates, an integrated handle and base design, plus a new micrometer gauging mechanism make the Dayco 100S portable crimper ideal for in-the-field hose assembly. Our D100S crimper has four strain rods for reinforcement and added precision and durability. 11 color-coded die sets make correct die selection easy and allows for crimping one- and two-wire braided hose and four-wire spiral hose through 1" I.D. Plus this strong, yet lightweight crimper can be easily customized with a choice of optional pumps, dies and a die storage box.

Designed for storing reels of hydraulic hose.

This unique reel stand is designed for easy set up and access allows for the storing and dispensing up to five reels of hose. The display stand measures approximately 40"W x 30"D x 51"H.

Designed for easy hose dispensing from a hydraulic hose reel.

The Dayco hydraulic hose roller platform – which is 24"W x 18"D x 2"H – is made of structural steel, powder-coated and comes completely assembled with rollers that can be adjusted to accept different diameter reels. With a max reel width of 21" and a reel diameter of 12" to 30", the floor-level platform greatly reduces the need to lift heavy hose reels.

Designed for storing couplings and adapters.

Measuring only 41-1/8"W x 12-1/2"D x 30-5/8"H, the Dayco six-drawer hydraulics cabinet maximizes your workspace efficiency. The cabinet’s drawers are mounted on roller bearing slides for smooth, reliable operation and fully extend to provide total and easy access. Included are 40 qty 3-1/2" wide bins and 10 qty 7" wide bins designed with removable dividers to permit inventory adjustment. Options include stationary leg sets, caster legs, additional bins and plastic inserts.

Designed to cut up to 2" I.D. textile reinforced and non-reinforced rubber hose and tubing.
SKU 93847

The Dayco hose and tubing cutter features a replaceable hardened stainless-steel blade that allows for a clear cut with no burrs or residue. Featuring a safe-to-use tough glass-filled nylon handle with attached ring, this cutter also allows for ease of carrying or for attaching to the Dayco hose display merchandiser.