Dayco Hoses

D6FL Fuel Line

Dayco Style D6FL Fuel Line

Designed for low pressure transmission of oil, gasoline or water.

The Dayco style D6FL fuel line is a low pressure hose that features a nitrile tube and black synthetic rubber cover with textile braid reinforcement. It is resistant to both oil and external weather conditions and offers a temperature range of -40°F (-40°C) to +212°F (+100°C) and a maximum working pressure of 400 psi. Recommended for use with coupling series BI and DC sizes (4 – 8), D6FL replaces DR6 and DFL hoses while meeting SAE J30R2, J30R3 and 100R6 (sizes 4, 5, 6 and 8).

 

DB7 Push-On Hose

Dayco Style DB7 Push-On Hose

Designed for low pressure transmission of oil, gasoline, air, water and coolants.

The Dayco style DB7 push-on hose features a nitrile tube and black synthetic rubber cover with a single textile braid reinforcement. It is resistant to both oil and external weather conditions and offers a temperature range of -40°F (-40°C) to +212°F (100°C) in regular applications and up to +160°F (+71°C) on compressed air applications with a maximum working pressure of up to 375 psi. Recommended for use with coupling series PO, BI and DC, this hose is MSHA approved.

*NOT intended for alcohol blended or biodiesel fuels.
*NOT suitable for impulse applications.

DBH Barrier Refrigerant Hose

Dayco Style DBH Barrier Refrigerant Hose

Designed for use with R12 and R134A refrigerant systems only.

The Dayco style DBH barrier refrigerant hose features nitrile/nylon barrier/neoprene tube construction, and a black EPDM cover with textile reinforcement that is resistant to abrasion, ozone and heat. With a temperature range of -22°F (-30°C)  to +257°F (+125°C) and a maximum working pressure of 350 psi, this hose is recommended for use with coupling series BL and SB. It also exceeds SAE J51 and meets SAE J2064 – Type C, Class 11 criteria.

DFL Fuel and Oil Hose

Dayco Style DFL Fuel and Oil Hose

Designed for low pressure transmission of oil, gasoline or water.

The Dayco style DFL fuel and oil hose features a nitrile tube and black synthetic rubber cover that is resistant to both oil and weather, with one- or two-textile braid reinforcement depending on hose size. With a temperature range of -40°F (-40°C) to +212°F (+100°C) and a maximum working pressure of 300 psi, this hose is recommended for use with coupling styles BI and DC.

*NOT suitable for use in fuel injection applications, alcohol blended or biodiesel fuels.

DGL Hydraulic Hose

Dayco Style DGL Hydraulic Hose

Designed for use on high temperature truck and bus applications such as diesel fuel, gasoline, hot oil, air brakes and hydraulic lines.

The Dayco style DGL hydraulic hose features a seamless chlorinated polyethylene tube and a black textile braid cover that is oil and mildew resistant, with a reinforcement of an inner textile braid and a high-tensile steel wire braid. With a temperature range of -40˚F (-40°C) to +300˚F (+149°C) and a maximum working pressure of up to 1,500 psi, this hose is recommended for use with coupling styles GL and DC. It also meets SAE specification J1402, Type A1 and is approved for DOT FMVSS- 106 air brake applications.

DPW DayBlast® Pressure Washer Hose

Dayco Style DPW DayBlast® Pressure Washer Hose

Designed for use with pressure washer applications.

The Dayco style DPW DayBlast® pressure washer hose is a one-wire construction designed specifically for the demands of today’s pressure washer applications. This hose – which is recommended for use with DC couplings – features a grey non-marking synthetic rubber cover, a nitrile synthetic rubber blend tube, a temperature capability of up to +300˚F (+149°C) and working pressures up to 3,000 psi.

*NOT suitable for steam applications.

DR1 Hydraulic Hose

Dayco Style DR1 Hydraulic Hose

Designed for use as medium pressure hydraulic lines on mobile equipment, machine tools and farm machinery.

The Dayco style DR1 hydraulic hose features an oil-resistant, seamless synthetic rubber tube and cover with a single high-tensile steel wire braid reinforcement for increased strength and resistance to weather. With a temperature range of -40˚F (-40°C) to +212˚F (+100°C) and a maximum working pressure of up to 2,750 psi, this hose meets SAE 100R1 AT requirements and is recommended for use with coupling series DC and PG.

DR2 Hydraulic Hose

Dayco Style DR2 Hydraulic Hose

Designed for high pressure hydraulic lines on off-the-road construction equipment, machine tools and farm equipment.

The Dayco style DR2 hydraulic hose features an oil-resistant synthetic rubber tube, a black synthetic rubber cover that is resistant to both oil and weather and a reinforcement of two high-tensile steel wire braids. With a temperature range of -40°F (-40°C) to +212°F (+100 °C) and a maximum working pressure of up to 5,000 psi, this hose is recommended for use with coupling styles PG and DC and meets SAE 100R2AT.

DR4 Hydraulic Hose

Dayco Style DR4 Hydraulic Hose

Designed for use as a suction or return line on hydraulic systems.

The Dayco style DR4 hydraulic hose features a nitrile tube and MSHA approved synthetic rubber cover that is both oil and weather resistant, with a single textile braid and helix wire reinforcement for exceptional flexibility. It has a vacuum rating of 25" Hg, a temperature range of -40°F (-40°C) to +250°F (+121°C) and a maximum working pressure of up to 300 psi. Meeting SAE 100R4, this hose is recommended for use with coupling styles DC (12, 16 & 20 size only) and PG.

DR5 Hydraulic Hose

Dayco Style DR5 Hydraulic Hose

Designed for use as a high temperature, medium pressure hydraulic hose on material handling equipment, off-the-road equipment, machine tools and other air, water or oil service.

The Dayco style DR5 hydraulic hose features an oil-resistant synthetic rubber tube, an impregnated textile braid cover that is resistant to oil and mildew, with a single textile inner braid and single high-tensile steel wire braid reinforcement. With a maximum working pressure of up to 3,000 psi, this hose is recommended for use with coupling styles DN and DC and meets SAE 100R5, SAE J1402 Type All and DOT FMVSS-106. Temperature ranges vary by size:

  • Sizes 4 – 16 ranges from -40°F (-40°C) to +300°F (+149°C).
  • Size 20 ranges from -40°F (-40°C) to +212°F (+100°C).
DR6 Hydraulic Hose

Dayco Style DR6 Hydraulic Hose

Designed for use as a low pressure hydraulic line, flexible fuel line, power steering return line, and lubrication line.

The Dayco style DR6 hydraulic hose features a nitrile tube and neoprene MSHA approved cover with a single textile braid reinforcement. It has a temperature range of -40°F (-40°C) to +212°F (+100°C) and a maximum working pressure of up to 400 psi. This hose, which meets SAE 100R6, is recommended for use with coupling style DC.

DR7 Hydraulic Hose

Dayco Style DR7 Hydraulic Hose

Designed for use in medium pressure hydraulic systems which require a thermoplastic tube.

The Dayco style DR7 hose features a thermoplastic tube and black polyurethane, pin-pricked cover that is abrasion resistant, with a single polyester fiber braid reinforcement. It has a temperature range of -40˚F (-40°C) to +200˚F (+94°C) and a maximum working pressure of up to 2,750 psi. Meeting SAE 100R7, this hose is recommended for use with coupling series DC and TC.

DR7E Hydraulic Hose

Dayco Style DR7E Hydraulic Hose

Designed for use in medium pressure hydraulic systems which require a non-conductive hose and a thermoplastic tube.

The Dayco style DR7E hydraulic hose features a thermoplastic tube and orange polyurethane, non-pin-pricked cover that resists abrasion, with a single polyester fiber braid reinforcement. It has a temperature range of -40˚F (-40°C) to +200˚F (+94°C) and maximum working pressure of up to 2,750 psi. This hose is recommended for use with coupling series DC and 5 size TC and meets SAE 100R7 Non-Conductive requirements.

DR12X Hydraulic Hose

Dayco Style DR12X Hydraulic Hose

Designed for high pressure hydraulic service.

The Dayco style DR12X hydraulic hose features an oil-resistant synthetic rubber tube and a synthetic rubber cover that is resistant to both oil and weather. Utilizing a MSHA listed cover with a reinforcement of four spiral layers of high-tensile steel wire, this hose features a temperature range of -40°F (-40°C) to +250°F (+121°C) and a maximum working pressure of 4,000 psi. Compared to braided hose, the Dayco style DR12X hose provides longer life under the higher temperatures and pressures of modern hydraulically operated equipment. It is recommended for use with coupling style PG and meets SAE 100R12.

DR14 Hydraulic Hose

Dayco Style DR14 Hydraulic Hose

Designed for use with corrosive and/or high temperature fluids.

The Dayco style DR14 hydraulic hose features a white PTFE tube with a cover that consists of one braid of high-tensile stainless steel wire. It has a temperature range of -65˚F (-54°C) to +450˚F (233°C) and maximum working pressure of up to 1,500 psi. For steam, the maximum operating pressure is 200 psi at +388˚F (+198˚C). This hose is recommended for use with coupling style 91N and meets SAE 100R14A.

*May be used from the air compressor to the air reservoir on truck air brake applications.
*NOT recommended for fuel applications

DR15X Hydraulic Hose

Dayco Style DR15X Hydraulic Hose

Designed for severe high pressure applications.

The Dayco style DR15X hydraulic hose features an oil and weather-resistant synthetic rubber MSHA-approved cover with four- or six-spiraled layers of high-tensile steel wire to provide reinforcement. It offers a temperature range of -40°F (-40°C) to +250°F (+121°C) and a maximum working pressure of 6,000 psi.

DR16 Hydraulic Hose

Dayco Style DR16 Hydraulic Hose

Designed as a replacement for SAE 100R2 high pressure hydraulic lines on off-the-road construction equipment, machine tools and mining equipment.

The Dayco style DR16 hydraulic hose features an oil-resistant synthetic rubber tube and synthetic rubber cover that is resistant to both oil and weather and a reinforcement of two high-tensile steel wire braids. Compared to standard SAE 100R2 hoses, Dayco’s DR16 hose has a 50% smaller bend radius for tighter installations and easier routing. The temperature range is -40°F (-40°C) to +212°F (+121°C) and it has a maximum working pressure of up to 5,000 psi. Recommended for use with coupling styles PG and DC, this hose meets SAE 100R16.

DR17 Hydraulic Hose

Dayco Style DR17 Hydraulic Hose

Designed for timber processing and handling, agricultural and construction industries requiring an extra tough rubber cover for abrasion resistant applications.

The Dayco style DR17 hydraulic hose features a synthetic rubber tube and abrasion resistant cover. Hose I.D.s of 1/4", 3/8" and 1/2" have one braid of high-tensile strength steel reinforcement. Hose IDs of 5/8", 3/4" and 1" consist of two high-tensile strength steel reinforcement braids. The temperature range is -40°F (-40°C) to +212°F (+121°C) and it has a maximum working pressure of up to 3,000 psi. Meeting SAE 100R17, it is recommended for use with coupling series DC (sizes 4, 6, 8, and 10) and PG (size 12 and 16).

DPS High Temperature Power Steering Pressure Hose

Dayco DPS High Temperature Power Steering Pressure Hose

Designed for use with power steering fluid applications.

The Dayco style DPS high temperature power steering pressure hose utilizes a chlorinated polyethylene tube. The hose’s synthetic rubber cover resists oil, ozone and heat and protects a synthetic rubber tube that is compatible with power steering fluid. Two textile braids that resist high temperatures and permit proper volumetric expansion for system noise damping also provide an additional layer of reinforcement. Built to meet and exceed SAE J2050 specifications, its temperature range is -40°F (-40°C) to +300°F (+121°C) and it has a maximum working pressure of 1,500 psi.

DKF13 – SAE 100R13 Hydraulic Hose

Dayco Style DKF13 – SAE 100R13 Hydraulic Hose

Used for extreme high-pressure hydraulic lines on off-the-road construction equipment, machine tools and farm equipment.

The Dayco style DKF13-SAE100R13 hydraulic hose features four spiral layers of high-tensile steel wire for hose sizes 12 – 20, and six spiral layers of high-tensile steel wire for size 24. The tube is designed from oil-resistant synthetic rubber with a cover designed to resist weather. Recommended for use with the LG coupling style, this hose’s temperature range is -40°F (-40°C)  to +248°F (+120°C) and it has a maximum working pressure of 5,075 psi.

DKF15 – SAE 100R15 Hydraulic Hose

Dayco Style DKF15 – SAE 100R15 Hydraulic Hose

Used for extreme high-pressure hydraulic lines on off-the-road construction equipment, machine tools and farm equipment.

The Dayco style DKF15-SAE 100R15 hydraulic hose features four spiral layers of high-tensile steel wire for hose sizes 12 – 20 and six spiral layers of high-tensile steel wire for size 24. The tube is designed from oil-resistant synthetic rubber with a cover designed to resist weather. Recommended for use with the LG coupling style, this hose has a temperature range of -40°F (-40°C) to +248°F (+120°C) and a maximum working pressure of 6,090 psi.

DKF2 – SAE 100R2 Hydraulic Hose

Dayco Style DKF2 – SAE 100R2 Hydraulic Hose

Used for high pressure hydraulic lines on off-the-road construction equipment, machine tools and farm equipment.

The Dayco style DKF2-SAE 100R2 hydraulic hose features two braids of high-tensile steel wire. The tube is designed from oil-resistant synthetic rubber with a cover engineered to resist weather. Recommended for use with the KG coupling style, this hose has a temperature range of -40°F (-40°C) to +248°F (120°C) and a maximum working pressure of up to 5,800 psi.

DKF4SP Hydraulic Hose

Dayco Style DKF4SP Hydraulic Hose

Used for extreme high-pressure hydraulic lines on off-the-road construction equipment, machine tools and farm equipment.

The Dayco style DKF2-SAE 100R2 hydraulic hose features four spiral layers of high-tensile steel wire for hose sizes 6 – 16. The tube is designed from oil resistant synthetic rubber with a cover designed to resist weather. Recommended for use with the JG coupling style, this hose’s temperature range is -40°F (-40°C) to +248°F (+120°C) and it has a maximum working pressure of up to 6,450 psi.

DTC Push-On Hose

Dayco Style DTC Push-On Hose

Designed for low pressure transmission of oil, air, water and coolants.

The Dayco style DTC push-on hose features a nitrile tube and impregnated textile braid cover that is oil and mildew resistant. Its temperature range is from -40˚F (-40°C) to +200˚F (+93.3°C) and it has a maximum working pressure of 250 psi, or 160°F (+71°C) on compressed air applications and is recommended for use with coupling styles PO and BI.

*NOT recommended for use on impulse applications.